Swissbit information

Embedded and Industrial systems require a variety of memory and storage solutions

In contrast to typical consumer devices, Swissbit's Industrial Flash products are designed for highest reliability in extreme environmental conditions. They come with a large feature set tailored to the demand of the industrial market and with our commitment to long-term availability.

Swissbit's Industrial Solid State Drive (SSD) portfolio covers all relevant interfaces and form factors including SD and microSD Memory Cards, CompactFlash™ Cards (CFC), CFast™ Cards, SATA SSDs in form factors as 2.5", M.2, SATA SLIM and mSATA as well as USB Flash Drives (UFD). Our sophisticated Flash handling algorithms optimize performance and life time of the Single Level Cell (SLC) and Multi Level Cell (MLC) NAND Flash used in our products.

Product selection guide

Product range

  • Highly Reliable 2.5" SATA SSD

    X-60, X-600 series

  • mSATA MO-300

    X-60m, X-600m

  • SLIM SATA MO-297

    X-60s/ X-600s

  • Industrial M.2 SATA SSD

    X-60m2, X-600m2

  • microSD Memory Cards

    S-45u, S-450u, S-46u

  • Industrial CFast™ Card SATA III

    F-60

  • SD Memory Cards

    S-45, S-450, S-46

  • Flash-based storage solution

    CompactFlash™ Cards

  • e.MMC storage solution

    EM-20

Highly Reliable 2.5" SATA SSD

X-60, X-600 series

The Swissbit SATA 6Gb/s durabit™ X-60 SSD with MLC technology and the counterpart X-600 in SLC technology offer highest endurance and sustained performance by combining a powerful controller with DRAM supported FTL and increased overprovisioning (MLC only).

Swissbit's industrial grade 2.5" SSDs are ideal solutions for embedded and networking/communication applications requiring Solid State storage in a rugged and high density form factor.

The X-60 / X-600 series feature Swissbit's proven Power Fail Safety, retention improvement, ATA security feature set, NCQ, TRIM, advanced Wear Leveling & Bad Block management and in-field firmware update functionality. The Swissbit Life Time Monitoring tool provides detailed S.M.A.R.T. based status information for all Swissbit SSDs.

mSATA MO-300

X-60m, X-600m

Swissbit's mSATA full size MO-300 SSD modules are ideal solutions for embedded applications requiring Solid State storage in smaller, removable form factor. Each unit undergoes extensive testing at the full temperature range before being released for shipment. The X-60m/X-600m Series is designed for all industrial and NetCom applications requiring high data transfer rates up to 525 MB/s in sequential access and 79,000 IOPS in 4KB random access.

SLIM SATA MO-297

X-60s/ X-600s

Lots of embedded boards prefer slim SATA as the optimum form factor due to the 3.3 Volt supply and dual hole fixture which allows utilization in rugged environments .The X-60s / X-600s series is designed for all industrial and NetCom applications requiring high data transfer rates up to 525 MB/s in sequential access and 79,000 IOPS in 4KB random access.

In addition, they offer a wide range of features such as Swissbit's proven Power Fail Safety, ATA security feature set, Data Care Management, a Windows or Linux tool & SDK for detailed S.M.A.R.T. based Life Time Monitoring, NCQ, TRIM, advanced Wear Leveling & Bad Block management and in-field firmware update functionality.

Industrial M.2 SATA SSD

X-60m2, X-600m2

Swissbit's industrial grade M.2 SATA 6Gb/s SSDs are ideal solutions for embedded and networking/communication applications requiring Solid State storage in a small form factor.
The durabit™ X-60m2 SSD with MLC technology and equivalent SLC version X-600m2 offer highest endurance and sustained performance by combining a powerful controller with DRAM supported FTL. The X-60m2 uses increased overprovisioning for enhanced endurance. The modules are available in 2242, 2260 and 2280 size. In addition, the M.2 products feature Swissbit's proven Power Fail Safety, Data Care management, ATA security feature set, NCQ, TRIM, advanced Wear Leveling & Bad Block management and in-field firmware update functionality. The Swissbit Life Time Monitoring tool provides detailed S.M.A.R.T. based status information for all Swissbit SSDs.

microSD Memory Cards

S-45u, S-450u, S-46u

The latest MICRO SD memory card series S-45u (MLC version), S-46u (pSLC version) and S-450u (SLC version) include the same set of sophisticated features and, through the implementation of UHS-I, support data transfer rates of up to 48 MB/s. The combination of MLC (Multi Level Cell) NAND Flash with an innovative controller and page based firmware technology enables prolonged data retention and extended life cycles despite the write endurance limitations of MLC Flash.

The S-46u and S-45u SD memory cards excel with a random write data rate of up to 1400 IOPS.

Industrial CFast™ Card SATA III

F-60

CFast™ cards combine two existing industry standards into a single product: the CompactFlash™ (CF) card form factor and the Serial ATA (SATA) interface commonly used in hard disks.

The Swissbit SATA 6Gb/s durabit™ F-60 CFast™ card offers highest MLC endurance and sustained performance by combining a powerful controller with DRAM supported FTL and increased overprovisioning.

The lower cost standard MLC based F-50 and the high end SLC version F-600 complete the family. They achieve data transfer rates up to 520 MB/s in sequential access and 72,000 IOPS in 4KB random access. In addition, the series features Swissbit's proven Power Fail Safety, Data Care management, ATA security feature set, NCQ, TRIM, advanced Wear Leveling & Bad Block management and in-field firmware update functionality. The Swissbit Life Time Monitoring tool provides detailed S.M.A.R.T. based status information.

SD Memory Cards

S-45, S-450, S-46

Swissbit's Industrial SecureDigital (SD) memory card series benefit from an advanced system architecture and intelligent firmware with an impressive feature set.

The MLC card S-45 of the durabit™ family uses a page based firmware and results in unprecedented endurance and random write performance for MLC technology. This card is both optimized for read intensive as well as random write intensive applications.

The S-45/S-46 firmware features include powerful built-in error correction, read retry, autonomous data care management, randomizer, wear leveling and bad block management algorithms, and intelligent power fail protection. The Swissbit SD memory cards are supported by the Swissbit life time monitoring for real time status information.

Applications that demand highest endurance and performance benefit from the SLC based S-450. This series supports data transfer rates of up to 80 MB/s and offers the same data care features as the S-45. Both S-450 and S-45 fulfill UHS-I, class 10 speed grade. By only using the strong bit of an MLC cell the S-46 pSLC version increases the endurance by a factor of 6.7 against MLC and offers all the features of the S-45.

Flash-based storage solution

CompactFlash™ Cards

CompactFlash™ (CF) cards are still a very popular flash-based storage solution used in the embedded and industrial markets. The form factor as well as the connector is well established. With strong focus on quality, reliability, robustness and longevity, Swissbit designs its cards with no compromise. We only select components and apply design rules which fit the stringent requirements of our industrial customers. Our hardware and firmware has been tested and qualified by our experienced team and proved in many challenging customer applications.

e.MMC storage solution

EM-20

Swissbit's EM-20 e.MMC fulfills the JEDEC 5.0 standard and offers a reliable and stable storage product with true industrial operating temperature. The page based flash management enables both a high performance and high write endurance. Read disturb management eliminates risk of data loss for read intensive application and makes the EM-20 ideal for application like POS/POI, PLC, IoT, gaming, medical, or as a general boot medium for embedded applications.

The EM-20 is optimized for long life cycle that requires superior data retention as well as power fail safety.

Contact us

Leave us a message

Swissbit Micropage - Contact Form

Form Page 1

Address

Rutronik Europe

Rutronik Elektronische Bauelemente GmbH
Industriestrasse 2
D-75228 Ispringen

Phone
+49 (7231) 801-0

Fax
+49 (7231) 822-82

Mail
rutronik(at)rutronik.com

Rutronik USA

Rutronik Inc.
2745 North Dallas Parkway Suite 660
Plano, TX 75093

Phone
+1 469-782-0900

Fax
+1 469-782-0930

Mail
sales-na(at)rutronik.com