Door 4 – nRF54LV10A Launch
New Product Launch for nRF54L Series: nRF54LV10A
nRF54LV10A
Ultra-low-power, low-voltage Bluetooth LE SoC
On December 2nd, Nordic Semiconductor has introduced the nRF54LV10A SoC, a groundbreaking low-voltage Bluetooth LE system-on-chip (SoC) designed for next-generation healthcare wearables. This ultra-compact chip extends the company’s nRF54L Series, is optimized for space-constrained medical devices and can be powered directly by a single silver oxide coin cell, making it the ideal choice for continuous glucose monitors (CGMs) and wearable biosensors. The nRF54LV10A delivers exceptional energy efficiency, integration, and battery life, addressing the growing demand for connected healthcare solutions.
To meet the growing demands for more energy-efficient and smaller solutions, the nRF54LV10A offers a 1.2–1.7 V supply range, sub-50 nA hibernation mode, and the smallest chip-scale package in the series (1.9 x 2.3 mm). It integrates a 2.4 GHz radio, a 128 MHz Arm Cortex-M33 processor, a RISC-V coprocessor, 1 MB of non-volatile memory, and 192 KB of RAM, while consuming 30–50 percent less power than its predecessor, the nRF52 Series.
Security is a key focus, with features such as secure boot, firmware updates, storage, and Arm TrustZone® support, alongside tamper detection and hardened cryptographic acceleration. Uniquely, the nRF54LV10A is the first Bluetooth LE SoC to combine low voltage operation with Bluetooth Channel Sounding, enabling precise distance measurement, indoor positioning, and presence detection—critical for patient safety in healthcare applications.
As the fifth addition to the nRF54L Series, the nRF54LV10A complements other multiprotocol SoCs like the nRF54LM20A, nRF54L15, nRF54L10, and nRF54L05, giving developers flexibility to balance size, power, and functionality. The chip is available now for development with support from the nRF Connect SDK, with mass production scheduled for Q2 2026.
Applications
- Glucose Monitors
- Wearable Biosensors
- Connected Healthcare
- Trackers
Key Features
- 128 MHz Arm Cortex-M33
- 1 MB NVM and 192 KB RAM
- Ultra-low-power multiprotocol 2.4 GHz radio
- 1.2 – 1.7 V supply and GPIO
- <50 nA system hibernation mode and storage
- 3x SPI / TWI / UART
- ADC
- Global RTC available in System OFF
- 128 MHz RISC-V coprocessor
- TrustZone® isolation, tamper detection, and cryptographic engine with side-channel leakage protection
Key Benefits
- Designed for miniaturized devices powered by a silver oxide coin-cell
- Reduced design complexity, size, and cost
- Reliable and robust wireless connectivity
- Built-in security features for compliance with regulations
- Enables devices powered by smaller batteries
- Years of shelf-life enabled with the hibernation mode
Performance highlights
- Processing efficiency and performance: 123 CoreMark/mA @ 1.5 V, 503 CoreMark®
- Radio power consumption @ 1.5 V: 7.3 mA for RX and 10.1 mA for TX @ 0 dBm
- Sleep modes current @ 1.5 V: from 1.0 μA to 4.1 μA
- Maximum TX power: +4 dBm
- Sensitivity: -97 dBm (1M Bluetooth LE), -101 dBm (802.15.4)
Participate and Win!
How does the competition work?
You can win a Chipolo LOOP or CARD and a Nordic DevKit of your choice on behalf of your company.
To enter, select which Chipolo finder you would like to receive, as well as which Nordic boards you would like to win (you can select multiple options, and the lottery will decide which one you may win).
Fill out the form now and, with a little luck, you will receive the combination of your wishes:
Registration Form
Unfortunately, the competition has now ended. Discover the products in our shop and get in touch with our Nordic experts.
Learn more about the prizes
Nordic Semiconductor is a global leader of ultra-low-power wireless technologies and a long term partner of Rutronik and is offering you the opportunity to win one of their development hardware. Participate in our advent calendar and explore the world of Power Management, Short Range, Wi-Fi and Cellular.
nRF54L15-DK
nPM1304-EK
nPM1300-EK
nPM2100-EK
Power Profiler Kit 2
nRF9151-DK
Thingy:91 X
The Nordic Thingy:91 X is a battery-operated prototyping platform for cellular IoT based on the nRF9151 System-in-Package (SiP) supporting LTE-M, NB-IoT, GNSS and NR+, and certified for global operation. It is the ideal platform for rapidly developing a prototype for any cellular IoT concept, and is especially suited for asset-tracking applications. Nordic Thingy:91 X enables location tracking using cellular (MCELL and SCELL), Wi-Fi, or GNSS, in combination with nRF Cloud Location Services.
On top of this you have the chance to win a finder from our customer Chipolo. This product is a lightweight, water-resistant item finder designed to help you find your missing valuable items.
Chipolo LOOP
Rechargeable tracker with flexible silicone strap for easy attachment. Enjoy the freedom of universal compatibility with Apple “Find My” or Google “Find My Device.”
Chipolo CARD
Thin, rechargeable tracker that fits perfectly in your wallet. Discreetly slim yet impressively loud, CARD helps you keep track of your most important flat items. Universally compatible with Apple's “Find My” or Google's “Find My Device”.