One challenge in control cabinets for industrial applications in the 3-phase range, e.g. for motor drives or control systems, is the space required for components. The FPAC RAIL series addresses this problem with a completely new filter design. The new single-stage filter series is constructed with a printed circuit board in a plastic housing. It has screw terminals for the three phases and a terminal on the metal base plate for optimum ground connection to the rail.
In the standard version with ferrite cores, the new filters score with very good attenuation characteristics of up to 85 dB, which is already significantly (10-15%) better than comparable alternatives. With the optional HP version by using nanocrystalline cores, the attenuation performance in the frequency range of 10 – 300 kHz can be increased by up to a further 8 dB.
All 16 variants can be used at temperatures ranging from -40 °C to +100 °C. The filters are designed for currents from 3 A to 32 A at a maximum of 520 VAC, in accordance with IEC and UL standards. They are ENEC and cURus certified and are suitable for applications in accordance with IEC 62368-1.
Benefits at a glance:
- Slim housing (44 mm wide)
- Low leakage currents: 1.3 mA
- Metal base plate for optimum earth connection to the rail
- Filter variants with standard and high performance
- Simple snap-on mounting
- Operating temperature: -40 °C to +100 °C
- 3 A to 32 A at max. 520 VAC
Application examples:
- For 3-phase industrial applications in control cabinets
- Suitable for use in devices according to IEC/UL 62368-1
- Devices with high EMC loads (switching power supplies, converters, etc.) such as
- Industrial or machine controls
- Laboratory technology
- Telecommunications technology
- IT devices
For more information to the FPAC RAIL by Schurter and a direct ordering option, please visit our e-commerce platform at www.rutronik24.com. |
Contact Rutronik:
| Michael Baumann | Corporate Product Manager Mechanics | +49 7231 801 1533 | michael.baumann@rutronik.com |