Knowledge

Knowledge

When long range and LE are required: Rutronik adds the PAN1781 - Bluetooth 5 Low Energy module to Panasonic‘s portfolio

  Knowledge

Optimal for wearables: PAN1781 is Panasonic‘s latest ultra-low-power Bluetooth 5 module based on Nordic‘s nRF52820 SoC. With a power consumption of only 4.9 mA in Tx (at 0 dBm), 4.7 mA in Rx mode, 0.3 μA in System OFF mode and 1.2 μA with RTC wake-up, the PAN1781 is ideal for battery-powered devices such as wearables. The module also supports Bluetooth mesh, thread and ZigBee mesh protocols, making it...

Read more

Monitors and displays - Putting an end to cable spaghetti

  Knowledge

They might look wonderful in the brochure or on the website, but in reality, the cable spaghetti next to the monitors doesn’t look quite as appealing. 3-In-1 solutions that only need a single cable for power, touch controls and video now live up to the promise of the picture in the brochure.

Read more

Compactness convinces: RECOM RACM1200-V AC/DC enclosed power supply at Rutronik

  Knowledge

Fanless operation for long-term system availability: A special design with bottom plate cooling supports heat dissipation in RECOM‘s RACM1200-V power supply and enables continuous output power of up to 1000 W. In boost mode, up to 1200 watts of output power is available through the unit for up to 10 seconds, or for longer periods with sufficient system airflow. A wide range of output voltage settings and a...

Read more

A secure MCU platform for edge intelligence in the IoT - Machine learning and AI-based signal processing in edge computing

  Knowledge

AI (artificial intelligence) applications and services are increasingly being integrated into MCU platforms, especially in industrial environments. With an edge intelligence IoT MCU platform from Rutronik, hardware and firmware developers now have a complete edge computing solution for their AI-based applications.

 

Read more

The bridge to the periphery: Rutronik adds Gowin GoBridge™ ASSP product line to its product range

  Knowledge

Economically interesting alternative: with the cost-effective and power-saving GoBridge™ ASSP, Gowin is launching a product line that can be another option to the FTDI USB Bridge products already available. The GWU2X family enables conversion between USB (Universal Serial Bus) and four peripheral interfaces (JTAG, SPI, I2C and GPIO), while the GWU2U series is suitable for conversion between USB and UART....

Read more