4D LABS‘ configurable PIXXI-28 or PIXXI-44 GPUs enable a variety of functions, including touch detection, microSD or serial flash memory, GPIO and ADC, with multiple millisecond timers, UART and I²C communication.
The displays are offered in different shapes and sizes, such as round (with 1.3“) or rectangular versions with 2“, 2.5“ or 3.9“. In addition, depending on the requirements of the application, there is a choice option between capacitive and non-touch displays.
The pixxiLCD embedded graphic displays have a standard 15-pin ribbon cable connector in 0.5mm pitch with ZIF socket interface, through which UART, I/O, I²C and the power supply with reset signals are led from/to the display.
The 4D Workshop4 IDE developer software, which is compatible with all available pixxiLCD diplays, offers extensive possibilities for programming the system.
For more information about 4D‘s new pixxiLCD series and a direct ordering option, please visit our e-commerce platform at www.rutronik24.com.
Nikolai Schnarz, Product Sales Manager Display
+49 7231 801 4453 | nikolai.schnarz(at)rutronik.com