Rutronik News

Intel Optane with 3D XPoint technology: Better performance for your SSDs and HDDs

  Newsletter Article

Since the introduction of the first storage module in 1947 there were eight major leaps forward in storage technologies. Today another leap is in the making: Intel Optane™ with 3D XPoint is the first entirely new storage technology in 25 years! Developed by Intel®, the 3D XPoint technology is joining the ranks technically between DRAM and NAND. Intel® Optane™ Memory with 3D-XPoint enables accelerated program initialization like a DRAM, while on the other hand allowing storing data permanently like a storage device. Therefore, Intel Optane™ with 3D-XPoint technology offers the best of both worlds: Permanent storage and DRAM.

Intelligent system accelleration

Intel Optane optimizes the reaction rate of the computer on system startup as well as on application startup. Additionally Intel Optane Memory serves as an intelligent system accelerator. Thus Intel Optane intelligently adapts to how the PC is used to accelerate, facilitate and smoothen processes. The intelligent software automatically learns procedures of computer usage to accelerate continual tasks. As a result, the handling of the pc is individually optimized.

  • 2x faster boot
  • 5x faster web browser launch
  • 67% faster game launch
  • 5.8x faster e-mail application launch
  • Improvement of up to 65% in next level loading while gaming


Less time loss

The impressive responsiveness of Intel Optane allows the computer to boot faster, to find files in the blink of an eye and to store large files almost without delay.

 

Accelerated mass storage

A data storage device combined with Intel Optane Memory, such as a hard disk drive (HDD) or a solid state drive (SSD) provides the user with ultra-fast acceleration and affordable, large storage capacity. Thus, a Hard Disk Drive (HDD) coupled with Intel Optane™ Memory can provide a similar or in part better performance compared to an SSD.

  • Overall system performance is up to 28% faster
  • System performancse for hard drive acccess is up to 14 x faster
  • Improve everyday task responsivenessby 2x

 

Usage requirements for Intel Optane Memory

Intel Optane Memory is a M.2-plug-in module in the form factor M.2-2280. Hence a PCIe-M.2. slot is required to operate the SSD. Additionally, to fully exploit the Intel Optane Memory technology, an operational desktop platform from Kaby Lake series onwards and a chipset onwards the 200 series is required.

 

Areas of application: Interesting for industrial customers?

The application of Intel Optane Memory is not restricted to the consumer segment. Basically Intel Optane Memory can be used as a common storage medium as well. Because of the available capacities of 16GB and 32GB and endurance figures of up to 182.5TB Intel Optane Memory can be used in the industrial market as well. To use Intel Optane Memory as a storage medium older mainboards featuring a M.2 slot and supporting PCIe-SSD with NVMe can be utilized as well.

 

Key technical data

The endurance test results documented in the table on the right hand side were determined in accordance with the JEDEC (JESD218) standard and were taken by Intel. The resulting values were determined when Intel Optane Memory was operated in the client workload area.

 

Available right now in our Rutronik24 shop

As of now you can buy Intel Optane Memory Modules with storage capacities of 16GB and 32GB on Rutronik24.com.

 

 

Here you can find an official video by Intel in which the operation of Intel  Optane Memory and how it can improve your system is demonstrated.

References

 

 

 

Intel Optane
Product Brief: https://tinyurl.com/ybmjg67e