About Recom

RECOM Power manufactures a full range of standard and customized DC/DC and AC/DC converters, including switching regulators and LED drivers, from sub-1W to tens of kW. Within its headquarters in Austria, RECOM has a state-of-the-art logistics R&D center and laboratory where their high quality and innovative products are developed. RECOM’s manufacturing and logistics sites are ISO 9001 or automotive IATF 16949 certified, guaranteeing the highest level of quality control of their converters for IoT, Industry 4.0, energy technology, medical, and transportation.

To provide a lower supply chain risk, RECOM’s global design and manufacturing infrastructure-including an international distribution network-allows customers worldwide quick access to their power supplies.

The RECOM name has become synonymous with high quality, integrity, innovation and excellent customer service within the electronics industry. RECOM powers your products.


New Product Information

130W AC/DCs in 2”x4” format suit wide applications

The RACM130E-K series in the industry-standard 2” x 4” footprint, is aimed at applications that are cost-sensitive, but still require high performance and highest levels of safety certification. The parts operate from 85 to 264Vac with tightly regulated single outputs including 12V, 15V, 24V, 36V and 48VDC, providing 130W output power peak, or continuously with airflow. Efficiency is high, around 90% and this is maintained down to light loads for ErP compliance. No-load losses are also low at less than 200mW at 230Vac. Safety certifications include 2MOPP/250Vac medical for ‘B’ or ‘BF’ applications to IEC/EN/ANSI/AAMI ES 60601-1, as well as IEC/EN 62368-1, IEC/EN 60335-1 and IEC/EN 61558-1 for industrial, test and measurement, IT and household use, all to 4000m altitude. On-board dual input fusing is included.

90W 2”x4” AC/DCs are versatile

The specifications of the RACM90-K have not been compromised, however, with the parts featuring a wide 85-264VAC input range, tightly regulated single outputs including 12V, 15V, 24V, 36V, and 48VDC, and an operating temperature range from -40°C to +90°C with derating. Safety certifications include 2MOPP/250VAC to IEC/EN/ANSI/AAMI ES 60601-1, ‘B’ and ‘BF’ compliant with dual input fusing for medical applications, as well as to standards for reinforced isolation for industrial, test and measurement, ITE and household use, all to 4000m altitude. The parts are classified as Limited Power Source (LPS) and are suitable for installation in surge Class 3 and overvoltage category OVC III environments. Additionally, EN 55032/35 ‘Class B’ emissions limits are met with a large margin. Efficiency is high and is maintained down to light loads, complying with ErP requirements, and no-load consumption is less than 200mW at 230Vac.

15W and 25W AC/DCs operate to 528VAC in harsh conditions

The new cost-effective, board-mount AC/DC converters rated at 15W and 25W are the RAC15-K/480 and the RAC25-K/480, with an input range of 85-528VAC. The products build on the success of RECOM’s RAC05-K/480, a 5W AC/DC with the same ultra-wide input range. Outputs available are 5V, 12V, 15V and 24V, fully protected against short circuits, over-current and over-voltage. The Parts are certified as Limited Power Source (LPS) according to IEC 62368-1 and can be used in over-voltage category III (OVC III) applications in pollution degree 3 (PD3) environments up to 5000m altitude. Certification to IEC/EN 61010 is also held and the parts are EN 55035 and EN 55032 Class B EMI-compliant, with floating outputs. Efficiency achieved is high, up to 87%, allowing operation from -40°C to 70°C ambient without derating (60°C for the RAC15-K/480) and to 90°C with reduced power.

Products (Application Areas)

DC/DC Converters

buynow

DC/DC Converters

for on-board and trackside railway applications

Over the years, RECOM has expanded its portfolio of DC/DC converters for the railway industry from 8W up to 240W and is now able to offer one of the market’s broadest portfolios of EN50155 certified products.

The RP and RPA series of regulated DC/DC converters are specially designed for railway applications with 4:1 wide input voltage ranges to cover the standard supply voltages from 24VDC up to 110VDC. The railway converters are EN50155 certified and with CE mark for use in the demanding rolling stock environment as well as in harsh industrial and trackside applications.


With an efficiency of up to 93%, cooling by natural convection is typically all that is needed to achieve Tx operating temperatures, but pre-mounted heatsinks are also available if required. Railway-certified series start at 8W in an SMD case and go up to 240W half-brick, offering an impressive power density of up to 4.5W/cm³.

Power Supplies

Power Supplies

for IoT

RECOM’s energy-efficient AC/DC and DC/DC converters live up to the Industry 4.0 and IoT challenges and offer high efficiency at both light load and full load at affordable prices.

The Internet of Things (IoT) covers many separate concepts, but they share the following common features: distributed intelligence, multiple interconnected sensors/actuators and decentralized control. In practice, IoT means that certain spaces, environments or objects can be made “smart” by incorporating sensors that can communicate to make them behave intelligently. Not every power supply is suitable for an IoT application. They must be space-saving, reliable, highly efficient at both low load and full load, and above all they must be affordable as they will be as common as the sensors, processors and actuators that they supply.

For all these requirements, RECOM offers a variety of suitable products: Highly efficient, low standby consumption AC/DC power supplies that can be used in a smart office with hundreds of intelligent sensor nodes, low cost isolated DC/DC power supplies for multiple input channels and a very low input voltage boost converter to generate a reliable power supply from a single battery cell.

High-Quality Power Modules at Low Cost

High-Quality Power Modules at Low Cost

Keep your BoM under control, and save development time! Modular converters were always considered to be more expensive than discrete solutions. However, with the commissioning of its own SMT factory, RECOM is able to offer select converter series at very attractive prices.


With economy of scale, RECOM is able to provide significant cost savings compared to similar products without compromising quality. Whether on-board or off-board AC/DC, regulated or unregulated DC/DC converters, and switching regulators, RECOM’s portfolio offers low-cost solutions for most applications.

Unexpected problems, such as component tolerances, testing failures and EMC issues possible with discrete designs can lead to troublesome delays and re-design costs. Complete, pre-tested, pre-certified modules not only save on development time but also reduce manufacturing complications and simplify the final certification process. With fewer components to manage, procurement teams also benefit from a single modular, low-cost solution.

Miniature Power Supplies

for Smart Homes & Smart Offices

Miniature Power Supplies

for Smart Homes & Smart Offices

To meet the emerging demands of smart building applications, RECOM extends its existing low-power RAC series with new household certified AC/DC converters at lower cost.


Intelligently networked smart homes and smart offices often require control systems with many low power nodes, actuators and sensors that are “always on”. RECOM’s low cost AC/DC power supplies were specially designed to power smart building infrastructure 24/7 with very low standby power consumption (as low as 35mW), extra-wide input voltage range and full household (IEC/EN60335-1), CE (LVD+EMC+RoHS2) and industrial safety certifications (IEC/EN/UL60950).

 

They offer compact sizes for easy installation both on- or off-board and deliver reliable, regulated, short-circuit and overload-protected local DC power with reinforced isolation to run smart building automation applications.

 

High Isolation DC/DC Converters

High Isolation DC/DC Converters

for Gate Drivers

The simplest (functional) isolation of a DC/DC converter can withstand 1kVDC for one second, however
this is often not sufficient for high-side gate drivers. RECOM combines the required high insulation
voltage, asymmetric output voltages, and low isolation capacitance into one simple DC/DC module.


High side inverters are often floated a few hundred volts with an opto-isolated PWM control, so the gate drivers need an isolated power supply. This isolated supply is typically +15/-9V for IGBT, +20/-5V for SiC (+15/-3V for 2nd Gen. devices) or +6V and +9V for GaN. A typical DC/DC isolation voltage would be at least twice the working voltage, but the high ambient temperature and fast switching edges generated by these high-power transistors additionally stress the insulation barrier.


Whether IGBT, SiC MOSFET or GaN HEMT, RECOM has the matching DC/DC converter module, featuring the required asymmetric output voltages, high insulation voltage and low isolation capacitance. The R-REF01-HB reference design can be used to compare the real-life performance of various high power switching technologies.

R-78 modular Switching Regulators

R-78 modular Switching Regulators

RECOM’s R-78 series is the original non-isolated, high-efficiency switching regulator, designed as a pin compatible drop- in replacement for LM78 linear regulators - no heatsink required! RECOM's R-78 series switching regulator modules offer all the advantages of a switching regulator - high efficiency, wide input voltage range, accurate output voltage regulation - with a low cost for production quantities.

The R-78 series offers a risk-free, pre-tested solution that makes designing a switching regulator circuit redundant. The R-78 series meets all of the most commonly requested specifications yet makes no compromise when it comes to quality and reliability as it is guaranteed with a full 3-Year warranty from RECOM.

High Power Density DC/DC Converters

High Power Density DC/DC Converters

for Industrial and Electro-Mobility Applications

RECOM offers a range of PCB mounted DC/DC converters for 12V, 24V, 28V, 36V, 48V, 72V, 96V or 110V battery-powered applications.

The RP and RPA series of board-mounting DC/DC converters are available from 30W to 240W with a power density up to 4.5W/cm³ - one of the highest currently available on the market. They use planar transformers to reduce the converter size without compromising on efficiency or output power, a construction method that also supports a fully automated production process which makes them extremely reliable and cost-effective. These series are used in many space- constrained industrial, test-and-measurement, transport, railway and other demanding applications that require a 4:1 input voltage range; the RPA100H-RUW and RPA200H-RUW even offers an exceptional 10:1 input voltage range.

Contact Us

Leave Us a Message

Micropages

Address

Rutronik Europe

Rutronik Europe

Rutronik Elektronische Bauelemente GmbH
Industriestrasse 2
D-75228 Ispringen

Phone
+49 (7231) 801-0

Fax
+49 (7231) 822-82

Mail
rutronik@rutronik.com

Rutronik America

Rutronik America

Rutronik Inc.
2745 North Dallas Parkway Suite 660
Plano, TX 75093

Phone
+1 469-782-0900

Fax
+1 469-782-0930

Mail
sales-na@rutronik.com