INCREASE YOUR POWER DENSITY WITH 3D POWER PACKAGING

Low power non-isolated DC/DC switching regulators and isolated converters need to be cost-effective, despite ever-increasing demands for better performance and improved power density. Manufacturers have responded over time with many form-factors that leverage low cost manufacturing, often with a minimal component count with transformers and inductors hand-soldered to traditional PCBs. To minimize the PCB footprint, through-hole SIP versions are often used, though they can complicate the assembly, requiring mixing of wave, or even hand soldering with the reflow process for the other SMT components used on the board. 


Although millions of this style of through-hole DC/DC converter are sold each year, a long-term goal for RECOM has been to develop versions which can be handled, placed and soldered like any other modern SMT component, but also with a low profile to match today’s slim-line products. However, the footprint must still remain small to realize the advantages of a module over a discrete design. To achieve this, non-isolated DC/DC switching regulators and isolated converter modules have to utilize the Z direction by integrating 3D assembly techniques.


3D Power Packaging® for Low Power DC/DC Converters

RPM, RPMB, RPMH - NON ISOLATED LGA POWER MODULES

  • 0.5A, 1A, 1.5A, 2A, 3A, & 6A output current
  • 4-65VDC input
  • Adjustable output up to 28VDC
  • Up to 99% efficiency, no need for heatsinks
  • 6-sided shield for low EMI
  • Wide operating temperature from -40°C up to +107°C at full load
  • For battery-powered equipment, telecom, FPGA, or POL applications
  • Fully-protected with SCP, OCP, OTP, & UVLO
  • Made in Europe

RPX - NON ISOLATED QFN POWER MODULES

  • 1A, 1.5A, & 2.5A output current
  • Vin up to 36VDC
  • Adjustable output up to 30VDC
  • Overmolded leadframe technology
  • Integrated FETs, inductors, and passives for simple design
  • Excellent thermal performance for the harshest application demands
  • Fully-protected with SCP, OCP, OTP, & UVLO

RS12-Z SERIES - 12W ISOLATED and REGULATED DC/DC CONVERTERS

  • 12W in a SIP8 package
  • 3kVDC isolation
  • Fully regulated 
  • 4:1 input 9-36V or 18-75V
  • Wide choice of output voltages
  • High operating temperature
  • On/off control
  • Output trim
  • Short circuit protection
  • Safety agency certified

R1SX, R2SX, R1DX, R1ZX - SURFACE-MOUNT ISOLATED DC/DC CONVERTERS

  • Industry standard surface-mount pin-out, common across the family
  • Selection of input and output voltages
  • Dual outputs available (R1DX)
  • Isolation up to 3kV/1 second (2kV R1ZX)
  • High efficiency
  • No minimum load requirement
  • 1W output over a wide temperature range (R1SX, R1DX, R1ZX)
  • 2W output (R2SX)
  • Ideal for communication interface power isolation and general use
  • Safety agency certified

R05CT05S - ISOLATED SOIC-16 DC/DC CONVERTER

  • Post regulated 0.5W
  • Ultra-low 2.65mm profile
  • Selectable output voltages: 3.3 and 5VDC
  • Wide temperature range (-40 to +125C)
  • 5kVAC reinforced isolation
  • For medical device periphery, COM port isolation, transceiver isolation, current sensing
  • Meets CISPR32 class B EMC limits
  • 62368-1 and 60601-1 with 2MOPP
  • Fully-protected with SCP, OCP, & OTP

Contact Us

Micropages